HDO206 Receiver
The HDO206 is a dual receiver module for fibre optic return path links in CATV and FTTLA networks. The module features front panel RF test points and DC test points for optical input power. Optical input connectors can be factory installed at the rear or at the front panel.
The receiver has an extended frequency range to fulfil DOCSIS 3.1 requirements. HDO206 has an integrated alarm receiver to enable reception of monitoring data from AC800 FTTLA node, AC810 node, CXE880 node or E62 transponder installed into E8 node or E3 amplifier.
Features at a glance:
- DOCSIS 3.1 compatible
- Low noise current density
- Two independent return path receivers
- Also high input power model available
- Integrated node alarm receiver (AC800 FTTLA, AC810, CXE880 or E62 counterpart)
- Monitoring of 32 nodes
- Wide input power/output level range
- Three output level control modes: 1) Automatic based on OMI; target output level and optical input level, 2) Automatic based on optical input level and 3) Manual
- Small form factor family, 2 RU height
- Fibre connectors can be located at the rear or at the front panel
Product Specifications
Optical parameters
Light wavelength
1260…1620 nm
Input power range
– Standard model
– High input model
– Standard model
– High input model
-25…-5 dBm
-20…+3 dBm
RF parameters
Frequency range
5…204 MHz
Output level
– Standard model
– Hight input model
– Standard model
– Hight input model
2 * Popt + 134 dBμV
2 * Popt + 130 dBμV
Flatness
±0.75 dB
Slope variation
±0.75 dB
RF impedance
75 Ω
Output return loss
18 dB
Level control range
60 dB
RF test points
20 dB
Isolation
50 dB
Linearity and noise parameters
Noise current density
3.8 A/√Hz
CINR (full load 5-204 MHz)
– Standard model
– High input model
– Standard model
– High input model
49 dB @ -5 dBm, 29 dB @ -20 dB
51 dB @ -5 dBm, 29 dB @ -20 dB
Alarm receiver
Maximum number of monitored nodes
2 x 16
Data carrier frequency
10.7 MHz
Modulation method
ASK 9600 bpd or FSK 38400 bps
Channel bandwidth 0.4 MHz
Channel bandwidth 0.4 MHz
ASK decision making threshold
75 dBµV
General
Power consumption
5 W (2.6 W if only 1 RX)
Supply voltages
25 V / 145 mA (70 mA if only 1 RX)
6.3 V / 230 mA (145 mA if only 1 RX)
6.3 V / 230 mA (145 mA if only 1 RX)
Optical connectors
SC/APC
RF connectors
F female
Cooling
Free air flow
Dimensions (h x w x d)
2U x 7HP x 380 mm, Occupies 1/12 of HDX002
Weight
1.5 kg
EMC compliance
EN 50083-2
Enclosure classification
IP20
Operating temperature range
0…+45 °C
Storage temperature range
-20…+60 °C
Operating relative humidity
0…85%
