AC3010 Amplifier

The AC3010 is an intelligent single active output amplifier with 48 dB maximum gain and frequency support up to 1.2 GHz downstream and 258 MHz upstream. The latest GaN technology offers high output levels (Umax 115.0 dBμV, 112 channels).

The AC3010 amplifier is based on the latest technology and delivers an incredible all-around performance, flexibility and cost-efficiency. Do not let the functional exterior fool you. You are looking at one of the most intelligent amplifiers on the market.

Features at a glance:

  • 1.2 GHz bandwidth
  • Electrical adjustments
  • Forward amplifiers use the newest GaN HEMT technology
  • GaAs push-pull return amplifier on the motherboard
  • Temperature compensated forward and return path
  • Excellent ESD and surge protection
  • Remote power supply with PFC
  • PC and Android user interface
  • With a transponder plug-in module:
    • CATVisor, HMS or DOCSIS remote connection
    • Remote ingress switch control
    • ALSC with fully user programmable pilots
    • Downstream spectrum analyser
    • Upstream signal monitoring with automatic plug-in and ingress control
    • True plug-and-play with single pushbutton alignment
    • Return path pilot generator

Product Specifications

Downstream signal path (values with diplex filters)
Frequency range
85…1218 MHz
Return loss
20 dB
Maximum gain
48 dB
Pivot frequency selection
1.0 / 1.2 GHz
Nominal interstage slope, distribution mode
13 dB
Nominal interstage slope, trunk mode
7 dB
Input gain control
-20…0 dB
Input slope control
0…20 dB
Interstage gain control, ALC
-10…0 dB
Interstage gain control, output
-10…0 dB
Interstage slope control, distribution mode
9…19 dB
Interstage slope control, trunk mode
3…13 dB
Flatness
±0.5 dB
Group delay
2 ns
Test point
-20 dB
Transponder connection
-19 dB
Input by-pass attenuation
-2.5 dB
Noise figure
8.5 dB
Umax(112 x QAM channels) @ 1.0 GHz
115.0 dBµV
Umax(138 x QAM channels) @ 1.2 GHz
112.0 dBµV
CTB 41 channels
118.0 dBµV
CSO 41 channels
119.0 dbµV
Upstream signal path (values with diplex filters)
Frequency range
5…204 MHz
Return loss
18 dB
Maximum gain
28 dB
Ingress switching
0 / -6 / < -45 dB
Gain control
0…28 dB
Slope control
0…15 dB
Flatness
±0.5 dB
Transponder connection
-37 dB
Noise figure
6.5 dB
General
Power consumption (65 & 90 / 230 VAC)
28 / 30 W
Supply voltage
27…65 / 40…90 / 205…255 VAC
Maximum current feed through
7.0 A / port
Hum modulation
70 dB
Resistance for remote current
25 mΩ / port
Input/Output connectors
PG11 thread, other types available
Test point connectors
F female
Dimensions (h x w x d)
245 mm x 255 mm x 100 mm
Weight
3.0 kg
Operating temperature
-40…+55 °C
Class of enclosure
IP67
Environmental (salt mist, cyclic)
IEC 60068-2-52, severity 1
Safety
EN60728-11 / EN60065
EMC
EN50083-2
ESD
4 kV
Surge
6 kV (EN 60728-3)
Image illustrates the Accessories link.

Accessories

Teleste offers a variety of accessories including both active and passive modules and power solutions. The accessories are designed and tested for Teleste broadband equipment. Find the products that suit you and get more of your network.

Image illustrates the Support link.

Support

Teleste´s experts are available for providing professional support. Find out how we can be at your service.