HDC100 Controller
The HDC100 is a communication module for the HDO platform. It is installed into HDX installation frame. HDC100 enables gateway Ethernet connectivity to an HDO system and allows remote management with Teleste CATVisor Commander, SmartLoader and Argus / EMS.
Features at a glance:
- Rear panel 10/100Base-T Ethernet connector for LAN connectivity
- Front panel 10/100Base-T Ethernet connector for local PC configuration connection
- Small form factor family, 2 RU height
- Rear panel general purpose I/O port for alarm output
Product Specifications
Ethernet interface, front and rear panel
Connector
RJ-45 socket
Standard
10/100Base-T
General purpose I/O port
Connector
D-9 male
Pinout
5: +24V output via 10 Ω, max 100 mA
6, 8: open collector output, 1 MΩ to 24V, max 100 mA, max 0-30 V
9: GND
1, 2, 3, 4, 7: reserved, do not connect
6, 8: open collector output, 1 MΩ to 24V, max 100 mA, max 0-30 V
9: GND
1, 2, 3, 4, 7: reserved, do not connect
General
Power consumption
3 W
Cooling
Free air flow
Dimensions (h x w x d)
2U x 7HP x 380 mm, Occupies 1/12 of HDX002
Weight
1.5 kg
EMC compliance
EN 50083-2
Enclosure classification
IP20
Operating temperature range
0…+45 °C
Storage temperature range
-20…+60 °C
Operating relative humidity
0…85%
